Monday, December 16, 2013

Clock Gating and CDC

The following code snippet shows  the sample code for modeling a clock gating library cell. The latch is transparent on clock low. The reason for using latch is to have glitch free gated clock. When clock is high, clock gating signal can't reach to the and gate, and therefore high pulse is always a full half a period.  
 
always @(ck_in or enable)
  if (~ck_in)
    enable_l = enable;
  

assign ck_out = ck_in && enable_l;
 
 If clock gating control logic (enable_1) is from a different clock domain, then it must be synchronized to ck  before being fed into  the latch.
In Figure below, the output of the latch can become metastable and causes potential  glitch in the gated clock.